RAVENOL Turbinenöl T 68

RAVENOL Turbinenöl T 68 is produced for the lubrication of gas and steam turbines as well as turbo compressors with and without transmission according to the specifications of DIN 51 515-2.

RAVENOL Turbinenöl T 68 is based on high quality mineral base oils with agents to increase the corrosion protection and aging resistance.

Application Notes:

RAVENOL Turbinenöl T 68 is used in fixed gas and steam turbines as well as  electrical machines or machines driven by steam turbines like generators, compressors, pumps and transmissions.

RAVENOL Turbinenöl T 68 can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings in case of problems of the contamination with water because a high proctection against rust and oxidation is requested.

Quality Classifications:

RAVENOL Turbinenöl T 68 corresponds to:

Specifications:

BS 489, DIN 51515 (L-TD), ISO 6743/0


Characteristic:

RAVENOL Turbinenöl T 68 is an universal mineral oil for turbines of especially chosen refined base oils with a natural high viscosity index. So-called “metal deactivators” are added to the turbine oil in addition to the normal additives in order to guarantee the following characteristics:
  • An excellent thermic and oxidative stability
  • An excellent viscosity temperature behaviour.
  • A high and stable viscosity index.
  • A very good oxidation stability also at very high temperatures.
  • A good protection against corrosion of Ferro and non Ferro metals.
  • An excellent water separation behaviour.
  • A very good air separation behaviour which excludes foam formation as far as possible.
  • A low pour point.
  • A good corrosion behaviour.
  • An excellent water separation behaviour / demulsifying behaviour.
RAVENOL Turbinenöl T 68

貨號: 1330356
包裝:

208L|1330356-208-01-999

項目 單位 數值 規範
Density at 20°C kg/m³ 876 EN ISO 12185
Viscosity at 40°C mm²/s 68 DIN 51 562
Viscosity at 100°C mm²/s 8,6 DIN 51 562
Viscosity index VI 98 DIN ISO 2909
Flash point(COC) °C 220 DIN ISO 2592
Pourpoint °C -25 DIN ISO 3016
Acid number mgKOH/g 0,15 -

所有數據均為約數,受習慣的變化。

工業用油

SAE/黏度

產品規格

認證

製造